welcome iCShop!     服務時間:週一 ~ 週五 9:00~12:00 / 13:00~17:00
13.56MHz RFID/NFC White Tag-1KB
13.56MHz RFID/NFC White Tag-1KB

13.56MHz RFID/NFC White Tag-1KB

NT$ 129


產品貨號

368031001367

品牌

原廠貨號

360

數量

  庫存量:3

運送方式

7-11取貨付款 郵寄(單一運費) 宅配 宅配貨到付款 外島郵寄 順豐快遞 順豐快遞貨到付款



規格內容說明

本商品為研發實驗用的模組,必須在二次加工後,才具備訊號傳輸功能。
並非直接插電後可直接使用之射頻模組,非屬電信管制射頻器材。

DESCRIPTION
This is a blank 13.56MHz RFID/NFC laundry tag - often used for laundry but also general tagging. The tag contains a small RFID chip and an antenna, and is passively powered by the reader/writer when placed a couple inches away.

These can be read by almost any 13.56MHz RFID/NFC reader but make sure it can handle ISO/IEC 14443 Type A cards as there are a few other encoding standards (like FeLica) They are tested and work great with both our PN532 NFC/RFID breakout board and Adafruit NFC/RFID Shield for Arduino!

These chips can be written to & store up to 1 KB of data in writable EEPROM divided into banks, and can handle over 100,000 re-writes. You can use our PN532 NFC/RFID breakout board or Adafruit NFC/RFID Shield for Arduino to read and write data to the EEPROM inside the tag. There is also a permanent 4-byte ID burned into the chip that you can use to identify one tag from another - the ID number cannot be changed.
These use a ISO/IEC 14443 Type A chipset, which used to be the 'classic' NFC chipset. In ~2014, the NFC forum decided not to support this chipset anymore, so newer phones do not support it. This only matters if you're trying to use this tag with a phone/tablet.

 

TECHNICAL DETAILS
RFID chip specification:

    • 1 KiloByte (8 KiloBit) non-volatile EEPROM storage
    • Built in encryption engine with 48-bit key
    • 4 Byte unique identifier burned into the chip
    • 13.56 MHz frequency

Tag specification:

    • 25.4mm diameter x 1mm / 1" diameter x 0.03"
    • 0.9 grams / 0.03 oz
    • Works about 2" away from reader